Long lasting, energy efficient, and environmentally friendly, LED lighting is one of the best choices for modern homes. Besides, considering that incandescent bulbs are slowly being phased out, every homeowner will need to make the switch. With today’s diverse LED lighting choices, LED light can find a home in just any room, whether lighting your kitchen cabinets or striking a chandelier or brightening up the exterior of your house. But which LED lighting design should you choose for your home? Well, a good LED light should have a few design features, including but not limited to:
1. Wavelength
To get the color of lighting that you really want, you to need focus on the wavelength specifications. This will help determine whether you are going to get yellow-green light or true green.
2. LED efficiency
The efficiency of light is generally measured in lumens per watts which refer to the total lumens produced divided by the total amount of power consumed. As a rule, most customers tend to aim for 100 lumens per watts from a whole system including any loses due to lensing, heat, power conversion and light guides.
3. LED Color Temperature
Although you may know how bright you want your LED to be, the color temperature may be a lot less obvious. Color temperature refers to the measure of how warm or cool the light appears. Since the color of light measured in kelvins can officially describe the appearance of a metal burning at various high temperatures, this can be a bit deceptive. The light temperature that you choose should, therefore, depend on the type of industrial application or consumer you are building.
4. Visibility
Visibility depends on the viewing angle of the LED and how well your eyes perceive the selected color together with the lumen output. For instance, green LED, run at 2mW may appear as bright as Red LED run at 20Ma.
5. Viewing angle
The viewing angle is the distance from the center of the beam of light before it losses half of its intensity. Although the common values are 120 and 45 degrees, a light pipe or another light guide will perhaps need a tighter viewing angle of 15 degrees or less.
Bottom-line
Purchasing the right LED light is quite different from buying normal incandescent bulbs. So, before you go shopping, there are a few factors that you need to take into considerations. The above highlighted are the major things that make a good LED lighting design. If you want your next LED lighting design to be optimized for impact then you need to keep them in mind.
No Comments