A hydraulic cylinder is a device that uses fluid pressure to power pistons, which in turn moves the machine. Hydraulic cylinders are typically used in construction equipment, mining equipment, and many other machines. Hydraulic cylinders can be made of metal or plastic, depending on their use. Hydraulic Cylinders fail for various reasons like corrosion, leaks, and age.
A Hydraulic cylinder can fail due to corrosion. This will make the piston rod seize up, which gives it its hydraulic pressure. If you see your machine’s Hydraulic Cylinders seizing up, the first thing you should do is inspect the valve for any signs of leakage or rust that could be causing a problem with either leaks or corroded hoses and seals that are not letting fluid through properly.
After inspecting these items, check out the grease on all moving parts and be sure there isn’t any sludge in the oil tank! Make sure both valves have enough oil too! Once done with this step, if everything looks good externally, disassemble components one at a time to fully inspect them.
If Hydraulic Cylinders are not disassembled regularly, then it is possible that the pressure inside of them can be compromised due to rust or corrosion, which will lead to failure! If you have Hydraulic Cylinders seized up because they are rusted on the outside, chances are you might need a new cylinder entirely.
Hydraulic Cylinders should not be used for anything other than their intended purpose! Hydraulic Cylinder Repair is a costly maintenance item and can be avoided by only using them where they are supposed to go.
When diagnosing low pressure or even no pressure, you need to check if there is an air leak on your hydraulic system. This may seem like common sense, but we cannot stress enough how important this step is to Hydraulic Cylinder Repair.
In conclusion, Hydraulic Cylinders are an integral part of any Hydraulics System or Hydraulic Machinery. If you do not use them for their intended purpose, they will seize up and need Hydraulic Cylinder Repair, which can be very costly.
If your Hydraulic Cylinders are seized because the rust on the outside is preventing them from opening, the chances are that you might need a new cylinder entirely rather than Hydraulic Cylinder Repair! Use only where they should go to avoid this type of maintenance cost later down the road! Check if there’s an air leak in your hydraulic system before diagnosing low or no pressure when replacing hydraulic cylinders.
No Comments